High Flow 12v 25kpa Pressure Diaphragm Pump Rohs Reach Approval
High Flow 12v Diaphragm Pump , Mini Diaphragm Vacuum Pump 6W Rohs Approval
Diaphragm Pump advantages:
1. Explosion-proof, zero leak, simple operation.
2. Idling capability,Self suction, No complex control.
3. Diversity of material,no rotating parts,applicable to various erosive situations.
4. Diaphragm, ball and ball seat adopt imported materials with longer service life.
5. Modularization of main valve and motor. No broken, easy to disassemble and repair.
electrical diaphragm pump's application
1. breast pump
2. Beauty equipment
3. Vacuum packaging machine
4. Double-headed electric breast pump
5. Portable ozone sterilizer
6. Vacuum sealing machine
7. Beauty massage
|
Model
|
SS512-1502-1500
|
|
Size(mm)
|
128.8*54*42
|
|
No-load current(mA)
|
180
|
|
The load current(mA)
|
450
|
|
Rated flow (L/M)
|
2.1
|
|
Vacuum(Kpa)
|
25
|
|
Self-priming height(M)
|
>1
|
|
Weight
|
375
|
Our company offers multiple component configurations allowing piston pump to be used for either vacuum operation, pressure operation, or alternating vacuum and pressure operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter and longer, reliable, highly efficient.
Its flow can deliver up to 2 L/min and 18L/M.
Usually our pump has 4 kinds of voltage:6V, 9V,12V and 24V .
When you choose pump, you can tell me the pump's voltage you need.
We can do it for you.
You can choose pump according to our model.
In addition,it can be mounted in any position.
Packaging:
CTN/PCS: 60PCS
G.W. : 19.5 KG
DIMENSION : 47 * 31 * 25 CM
1.The stock samples can be sent to you within 3-5 days by international express after received
2.The batch order can be shipped to you in about 30-40days after order confirmation (by air or by
sea)
FAQ
Is the pump loud? Will idling burn if don't connect with water ?
The pump has a certain noise during working hours, about 60 decibels. The inlet pipe is made of flexible hose, and the pump is fixedly installed to reduce noise. No water idling for a long time will not damage the pump.But it is not a good idea let this pump runs dry for too long.
Is there water in the Pressure Diaphragm Pump that has been used?
Each pump is tested at the factory, so there will be clean water in the water, so please put a red waterproof cap in time to prevent the pump from being too dry and not absorbing water for a long time.
What motor is used in the Pressure Diaphragm Pump?
Full copper wire double-rolled DC motor (power line does not divide positive and negative) continuous service life of more than 1000 hours.
Product Tags:
|
|
High Flow 12v 25kpa Pressure Diaphragm Pump Rohs Reach Approval Images
|
